User manual

Auto Scanning
The CS-1742 / CS-1744’s Auto Scan feature automatically cycles the KVM focus
through the computer ports at regular intervals. This allows you to monitor the
computer activity without having to take the trouble of switching from port to port
manually. See the table below for details.
Hotkey Action
[Scroll Lock] [Scroll Lock]
[A] [Enter]
Starts Auto Scan. The KVM focus cycles from port to port
at 5 second intervals.
[Scroll Lock] [Scroll Lock]
[A] [n] [Enter]
Starts Auto Scan. The KVM focus cycles from port to port
at n second intervals.
Note: 1. The n stands for the number of seconds that the CS-1742 / CS-1744
should dwell on a port before moving on to the next. Replace the n
with a number between 1 and 99 when entering this hotkey
combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto Scan
Mode in order to regain normal control of the console. To exit Auto
Scan Mode, press [Esc] or [Spacebar].
2004-09-24
Hotkey Operation
15