User manual

Keyboard Operating Platform
The CS-1742 / CS-1744’s default port configuration is for a PC Compatible
keyboard operating platform. If you have a Mac or Sun attached to a port, you can
change the port’s keyboard operating platform configuration as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see p. 16)
3. Press and release the appropriate Function key (see table). After completing
a setting, you automatically exit HSM.
Function Key Operation
[F2] Sets the Mac keyboard operating platform.
[F3] Sets the Sun keyboard operating platform.*
[F10] Auto detects the keyboard operating platform (for PC
compatible systems).
* The first time that the Sun system runs from a port, you must configure its
port for the Sun keyboard operating platform before you turn the system on,
or else the Sun system will not start.
List Hotkey Settings
To see a listing of the current hotkey settings, do the following:
1. Open a text editor or word processor.
2. Invoke HSM (see p. 16).
3. Press and release the F4 function key.
2004-09-24
CS-1742 / CS-1744 User Manual
18