USB 2.0 DVI KVMP Switch CS1782 User Manual www.aten.
CS1782 User Manual FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
CS1782 User Manual User Information Online Registration Be sure to register your product at our online support center: International North America http://support.aten.com ATEN TECH http://www.aten-usa.com/product_registration ATEN NJ http://support.aten.
CS1782 User Manual Package Contents The CS1782 package consists of: 1 USB 2.0 DVI KVMP Switch 2 Custom KVM Cable Sets 2 Custom 7.1 Channel Surround Sound Cable Sets 1 USB-to-PS/2 Converter 1 Firmware Upgrade Cable 1 Power Adapter 1 User Manual* 1 Quick Start Guide Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer.
CS1782 User Manual Contents FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii User Notice . . . . . . . . . . . . . . . . . . . . . . . .
CS1782 User Manual Keyboard Operating Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 List Hotkey Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 USB Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Hotkey Beeper Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Disable Port Switching Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CS1782 User Manual About this Manual This User Manual is provided to help you get the most from your system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Chapter 1, Introduction, introduces you to the CS1782 system. Its purpose, features and benefits are presented, and its front and back panel components are described. Chapter 2, Hardware Setup, describes how to set up your installation.
CS1782 User Manual Conventions This manual uses the following conventions: Monospaced [] Indicates text that you should key in. Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps.
Chapter 1 Introduction Overview The CS1782 USB 2.0 DVI KVMP Switch charts a revolutionary new direction in KVM (Keyboard, Video, Mouse) switch functionality by combining a 2-port KVM switch with a 2-port USB 2.0 hub at the same time as providing an interface for a DVI monitor. The CS1782 also supports state-of-the-art 7.1 channel surround sound to give a theater digital audio experience that enlivens video playback.
CS1782 User Manual Features 2-port DVI KVM Switch with USB 2.0 support and 7.1 channel surround sound audio One USB console controls two computers and two additional USB devices 2-port USB 2.0 hub built in Fully compliant with the USB 2.0 specification Full bass response provides a rich experience for 7.
1. Introduction Requirements Console A DVI compatible monitor capable of the highest possible resolution A USB mouse A USB keyboard Microphone and speakers Note: A PS/2 keyboard and mouse can used by using the converter included in the package Computers The following equipment must be available on each computer: A DVI port Note: The quality of the display is affected by the quality of the DVI display card. For best results, we recommend you purchase a high quality product.
CS1782 User Manual Operating Systems Supported operating systems are shown in the table, below: OS Version Windows Linux UNIX Novell 2000 and higher RedHat 9.0 and higher; Fedora Core 4 and higher SuSE 9.0 and higher AIX 4.3 and higher FreeBSD 4.2 and higher Sun Solaris 9 and higher Netware 6.0 and higher Mac OS 9.0 and higher DOS 6.22 and higher Note: Supports Linux Kernel 2.6 and higher.
1. Introduction Components Front View 1&2 3 No. Component 4 Description 1 Port Selection Pushbuttons Press a pushbutton for longer than two seconds to bring the KVM, USB, and audio focus to the computer attached to its corresponding port. Press a pushbutton for less than two seconds to bring only the KVM focus to the computer attached to its corresponding port. Press pushbuttons 1 and 2 simultaneously for 2 seconds to start Auto Scan Mode. See Auto Scanning, page 13.
CS1782 User Manual Rear View 1 2 5 6 No. 6 3 4 Component Description 1 Firmware Upgrade Port The Firmware Upgrade Cable that transfers the firmware upgrade data from the administrator’s computer to the CS1782 plugs into this connector. See page 23 for firmware upgrading details. 2 USB Console Ports Your USB keyboard and USB mouse plug in here. 3 Console Port Section The cables from your monitor, microphone, and speakers plug in here.
Chapter 2 Hardware Setup 1. Important safety information regarding the placement of this device is provided on Page 29. Please review it before proceeding. 2. Make sure that power to all the devices you will be installing has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
CS1782 User Manual 4. At the other end of the cable, plug the USB, video, microphone, and speaker cables into their respective ports on the computer. There are two audio options: a. For a standard audio installation, just use the ATEN custom KVM cable set provided with the package. This supports 2.1 channel surround sound. b. To utilize the 7.1 channel surround sound function, in addition to 4a above, also use the extra custom audio cable set provided.
2. Hardware Setup Standard 2.
CS1782 User Manual 7.1 Channel Surround Sound Audio Installation 7.
Chapter 3 Basic Operation Manual Switching There are two convenient methods to access the computers: Manual – which involves pressing the port selection pushbuttons located on the unit’s front panel; and Hotkey – which involves entering combinations from the keyboard. Hotkey port selection is discussed in the next chapter. For manual port selection: Press and release a port selection pushbutton to bring the KVM focus to the computer attached to its corresponding port.
CS1782 User Manual Powering Off and Restarting If it becomes necessary to Power Off the unit, before starting it back up you must do the following: 1. Shut down all the computers that are attached to the switch. 2. Unplug the switch’s power adapter cable. 3. Wait 10 seconds, then plug the switch’s power adapter cable back in. 4. After the switch is up, Power On the computers. Port ID Numbering Each CPU port on the CS1782 switch is assigned a port number (1 or 2 for the CS1782).
Chapter 4 Keyboard Port Operation The CS1782 provides an extensive, easy-to-use, hotkey function that makes it convenient to control and configure your KVM installation from the keyboard. Hotkeys provide asynchronous (independent) switching of the KVM, USB hub and audio focus. If you wish, you can give one computer the KVM console focus and the other the USB hub or the audio focus. Port Switching All port switches begin with tapping the Scroll Lock key twice.
CS1782 User Manual Going Directly to a Port Hotkey Action [Scroll Lock] [Scroll Lock] [n] [Enter] Brings the KVM, USB hub, and audio focus to the computer attached to the port corresponding to the specified Port ID. [Scroll Lock] [Scroll Lock] [n] [K] [Enter] Brings only the KVM focus to the computer attached to the specified port. The USB hub and audio focus remain where they are.
4. Keyboard Port Operation Auto Scanning The CS1782’s Auto Scan feature automatically cycles the KVM focus through the computer ports at regular intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port to port manually. See the table below for details. Hotkey Action [Scroll Lock] [Scroll Lock] [A] [Enter] Invokes Auto Scan. The KVM focus cycles from port to port at 5 second intervals. Five second intervals is the Default setting.
CS1782 User Manual Hotkey Setting Mode Hotkey Setting Mode is used to set up your CS1782 switch configuration. All operations begin with invoking Hotkey Setting Mode (HSM). Invoking HSM To invoke HSM do the following: 1. Press and hold down [Num Lock]. 2. Press and release [-]. 3. Release [Num Lock]. Note: There is an alternate key combination to invoke HSM. See below for details. When HSM is active, the Caps Lock, and Scroll Lock LEDs flash in succession to indicate that HSM is in effect.
4. Keyboard Port Operation Alternate HSM Invocation Keys An alternate set of HSM invocation keys is provided in case the default set conflicts with programs running on the computers. To switch to the alternate HSM invocation set, do the following: 1. Invoke HSM (see page 14). 2. Press and release [H]. The HSM invocation keys become the Ctrl key (instead of Num Lock) and the F12 key (instead of minus). Note: This procedure is a toggle between the two methods.
CS1782 User Manual Keyboard Operating Platform The CS1782’s default port configuration is for a PC compatible keyboard operating platform. If your console uses a PC compatible keyboard and you have a Mac or Sun attached to a port, for example, you can change the port’s keyboard operating platform configuration so that the PC compatible keyboard emulates the Mac or Sun keyboard. The procedure is as follows: 1. Bring the KVM focus to the port you want to set. 2. Invoke HSM (see page 14). 3.
4. Keyboard Port Operation USB Reset If the USB loses focus and needs to be reset, do the following: 1. Invoke HSM (see page 14). 2. Press and release [F5] Hotkey Beeper Control The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following: 1. Invoke HSM (see page 14). 2. Press and release [B]. The Beeper toggles On or Off. Disable Port Switching Keys To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the following: 1. Invoke HSM (see page 14). 2.
CS1782 User Manual Restore Default Settings To reset the CS1782 to its default hotkey settings, do the following: 1. Invoke HSM (see page 14). 2. Press [R] [Enter]. All hotkey settings return to the factory default settings. Display Emulation Technology To invoke Display Emulation Technology so the CS1782 reads and remembers the brand and display information of the monitor attached to the corresponding port, do the following: 1. Invoke HSM (see page 14) 2.
4. Keyboard Port Operation HSM Summary Table After invoking HSM (see page 14), key in one of the following keys to perform the corresponding function: Key Function [H] Toggles between the default and alternate HSM invocation keys. [T] Toggles between the default and alternate Port Switching keys. [F2] Enables Mac keyboard emulation. [F3] Enables Sun keyboard emulation [F10] Removes keyboard emulation mappings. Key press data is passed straight through.
CS1782 User Manual This Page Intentionally Left Blank 22
Chapter 5 Keyboard Emulation Mac Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. The emulation mappings are listed in the table below.
CS1782 User Manual Sun Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboard when the Control key [Ctrl] is used in conjunction with other keys. The corresponding functions are shown in the table below.
Chapter 6 The Firmware Upgrade Utility The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for upgrading the KVM switch’s firmware. The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware upgrade packages are posted on our Website as new firmware revisions become available. Check the web site regularly to find the latest packages and information relating to them: http://www.aten.
CS1782 User Manual 5. Invoke Firmware Upgrade Mode (see page 18). The front panel LEDs flash together to indicate Firmware Upgrade Mode is in effect. Starting the Upgrade To upgrade your firmware: 1. Run the downloaded Firmware Upgrade Package file – either by double clicking the file icon, or by opening a command line and entering the full path to it. The Firmware Upgrade Utility Welcome screen appears: Note: The screens shown in this section are for reference only.
6. The Firmware Upgrade Utility CS1782 [MAIN]: ... The Utility inspects your installation. All the devices capable of being upgraded by the package are listed in the Device List panel.As you select a device in the list, its description appears in the Device Description panel. CS1782 (MAIN)... 4. After you have made your device selection(s), Click Next to perform the upgrade.
CS1782 User Manual The firmware [Ver 1.0] is not newer than the current firmware [Ver 1.0.090] in device CS1782 [MAIN]: 000 Continue the upgrade? [Yes/No] If you enabled Check Firmware Version, the Utility compares the device’s firmware level with that of the upgrade files. If it finds that the device’s version is higher than the upgrade version, it brings up a dialog box informing you of the situation and gives you the option to Continue or Cancel.
6. The Firmware Upgrade Utility Upgrade Succeeded After the upgrade has completed, a screen appears to inform you that the procedure was successful: CS1782 [MAIN]: ... CS1782 CS1782 [MAIN]: CS1782 [MAIN]: [MAIN]: ... Click Finish to close the Firmware Upgrade Utility. After a successful completion, the switches exit Firmware Upgrade Mode, and reset themselves.
CS1782 User Manual Upgrade Failed If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete successfully, in which case you should do the following: 1. Power off the CS1782 and remove its housing. 2. Using a jumper cap, short the jumper on the mainboard labeled J17. The diagram below indicates the jumper location on the CS1782 board: 3. Power on the CS1782. It will now work with the factory default firmware. 4. Do the firmware upgrade procedure again. 5.
Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers. The device cabinet is provided with slots and openings to allow for adequate ventilation.
CS1782 User Manual Unplug the power cable before removing the power supply. If the system has multiple sources of power, disconnect power from the system by unplugging all power cables from the power supplies. Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulting in a risk of fire or electrical shock. Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.
Appendix Technical Support Technical support is available both by email and online (with a browser over the web): International Email Support Online Support support@aten.com Technical Support http://support.aten.com Troubleshooting Documentation Software Updates http://www.aten.com Telephone Support 886-2-8692-6959 North America Email Support ATEN TECH support@aten-usa.com ATEN NJ Online Support Technical Support ATEN TECH http://www.aten-usa.
CS1782 User Manual Specifications Function CS1782 Computer Connections Port Selection Console Connectors 2 Front Panel Pushbuttons; Hotkey Keyboard 1 x USB Type A F (black, rear panel) Mouse 1 x USB Type A F (black, rear panel) Video Audio Computer Connectors 1 x DVI-I F (white) Line Out Port 2 x Mini Stereo Jack F (green; 1 x front panel, 1 x rear panel Line In Port 1 x Mini Stereo Jack F (blue) Microphone Port 2 x Mini Stereo Jack F (pink; 1 x front panel, 1 x rear panel) Side Speaker Out
Appendix (Continued from previous page.) Power Consumption DC 5.3V, 4.8W Scan Interval 1–99 secs. (5 secs. default) KB / Mouse Emulation Video USB DVI-D: 2560 x 1600 @ 60Hz (Dual Link); supports Apple 20”, 23”, 30” Cinema Display; supports ViewSonic 22” LCD monitor VP2290b up to 3840 x 2400 @ 13Hz (Single Link). DVI-A: 2048 x 1536; DDC2B Environment Physical Properties Operating Temp. 0–50ºC Storage Temp. -20–60ºC Humidity 0–80% RH, Non-condensing Housing Metal Weight 0.
CS1782 User Manual Troubleshooting Symptom Mouse and/or Keyboard not responding. Possible Cause Improper mouse and/or keyboard reset. Action Unplug the cable(s) from the console port(s), then plug it/them back in. KVM switch needs to Power off all devices on the installation (see be reset. the note at the top of page 11); power off the KVM switch; wait five seconds; then power up USB devices not responding. USB ports need to reset.
Appendix Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
