User manual

1
Chapter 1
Introduction
Overview
The CS1784 USB 2.0 DVI KVMP Switch charts a revolutionary new direction
in KVM (Keyboard, Video, Mouse) switch functionality by combining a 4-port
KVM switch with a 2-port USB 2.0 hub at the same time as providing an
interface for a DVI monitor. The CS1784 also supports 2.1 channel surround
sound to give a theater digital audio experience that enlivens video playback.
As a KVM switch, it allows users to access four computers from a single USB
keyboard, USB mouse, and monitor console. As a USB hub, it permits each
computer to access any peripherals connected to the hub on a “one computer at
a time” basis.
The CS1784’s independent (asynchronous) switching feature allows the KVM
focus to be on one computer while the USB peripheral focus is on another. This
eliminates the need to purchase a separate USB hub as well as the need to
purchase separate stand-alone peripheral sharers – such as print servers,
modem splitters, etc.
The CS1784 further improves on previous designs with DVI (Digital Visual
Interface) connectors, and the transfer of keyboard and mouse data to the
computers via a fast, reliable USB connection. DVI supports both digital video
input (flat panel displays, data projectors, plasma displays, digital TVs and set-
top boxes) and analog video input (traditional monitors and TVs).
In addition to the CS1784’s 2.1 channel surround sound functionality, a single
microphone can provide audio input to each of the computers, and you can
listen to the audio output of each computer on a single set of speakers (on a one-
at-a-time basis). As with the USB peripherals, the audio focus can be
independent of the KVM focus.
Setup is fast and easy; simply plug cables into their appropriate ports. There is
no software to configure, no installation routines, and no incompatibility
problems. Since the CS1784 intercepts keyboard input directly, it will work on
multiple computing platforms (PC (x86/x64), Macintosh PowerPC, and Sun
Microsystems Sparc). There are two convenient methods to access the
computers: port selection pushbuttons located on the unit’s front panel; and
hotkey combinations entered from the keyboard.