Owners manual

ManualsBrandsAten ManualsComputers & Laptops8-Port USB HDMI KVM Switch - 8 Computer(s) - 1 Local User(s) - 1920 x 1200 - 1 x Network (RJ-45) - 12 x USB - 9 x HDMI - Ra

2. Hardware Setup

15

Rack Mounting – Front

1. Remove the screws, one each from the left and right sides of the switch

near the front of the switch.

2. Use the M3 x 8 Phillips hex head screws supplied with the rack mounting kit

to screw the rack mounting brackets into the sides near the front of the unit.

(Continues on next page.)