Owners manual

CS1798 / CS17916 User Manual
54
Hotkey Beeper Control
The beep can be enabled or disabled. The default setting is enabled. To disable
the Buzzer, do the following:
1. Invoke HSM (see page 47
).
2. Press and release [B].
This procedure is a toggle. Repeat to enable.
Video DynaSync
Video DynaSync is ATEN’s exclusive technology that eliminates boot-up
display problems and optimizes resolution when switching between ports. To
invoke Video DynaSync, do the following:
1. Invoke HSM (see page 47).
2. Press [D].
Note: If the monitor is disconnected and reconnected, the CS1798 /
CS17916 re-executes Video DynaSync.
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM (see page 47
).
2. Press [M].
This procedure is a toggle. Repeat to enable.
Note: Enable mouse emulation to perform any independent switching of a port
and for Auto Scan Mode or Skip Mode to work.