Manualshelf

Owners manual

ManualsBrandsAten ManualsComputers & Laptops8-Port USB HDMI KVM Switch - 8 Computer(s) - 1 Local User(s) - 1920 x 1200 - 1 x Network (RJ-45) - 12 x USB - 9 x HDMI - Ra
71727374757677787980
7. The Firmware Management Utility
65
OSD Configuration Backup/Restore
The Firmware Management Utility lets you backup the current OSD
configuration of the CS1798 / CS17916, and restore it when necessary. Storing
the OSD configuration settings is useful when deploying more than one
installation that uses the same settings.
Backup
Follow these steps to store a backup file to a local computer:
1. Make sure your computer is connected to the CS1798 / CS17916.
See Preparation, page 60, and follow steps 1–3.
2. When you have selected the F4 ADM function, scroll down to OSD
CONF BACKUP / RESTORE. Press [Enter], then press [Y] to invoke
OSD Config Backup / Restore mode.
3. Run the Firmware Management Utility. In the dialog box, choose OSD
Configuration Backup/Restore, then click Next.
4. In the window that appears, click Connect Device.
5. In the Password field, key in a password for the file.
Note: Setting a password is optional. If you do not set one, the file can be
restored without specifying a password.
6. Click Backup.
7. When the browser asks what you want to do with the file, select Save to
disk, then save it in a convenient location.