User's Manual

CS1942DP / CS1944DP User Manual
6
Components
CS1942DP Front View
CS1944DP Front View
No. Component Description
1 LED Status Panel This panel contains LED icons that light to indicate mode and port
status. The Mode and Port Selection Pushbuttons have three
corresponding LED icons that light to indicate status – KVM, Audio,
and USB.
2 Port Selection
Pushbuttons
For manual port selection (see Port Switching, page 17):
 Press a switch for less than two seconds to bring the KVM, USB
hub, and audio focus to the computer attached to its correspond-
ing port.
 Press a port selection pushbutton twice to bring the audio focus
to the computer attached to its corresponding port.
 Press a port selection pushbutton for longer than two seconds to
bring only the KVM focus to the computer attached to its corre-
sponding port.
 Press switches 1 and 2 simultaneously for 2 seconds to start
Auto Scan Mode (see Auto Scanning, page 23).
3 Mode Selection
Pushbutton
 This pushbutton allows you to cycle through the four focus
modes – complete, KVM, audio, and USB.
 Press and hold Mode Selection Pushbutton before powering on
and to enter Firmware Upgrade Mode.
1
22345
1
22345