User's Manual
Table Of Contents
- EMC Information
- User Information
- Package Contents
- Contents
- About this Manual
- Conventions
- Product Information
- Chapter 1 Introduction
- Chapter 2 Hardware Setup
- Chapter 3 Basic Operation
- Chapter 4 Hotkey Operation
- Hotkey Port Switching
- Hotkey Setting Mode
- Invoking HSM
- Alternate HSM Invocation Keys
- Alternate Port Switching Keys
- Keyboard Operating Platform
- List Switch Settings
- USB Reset
- Hotkey Beeper Control
- Port Switching Keys
- Firmware Upgrade Mode
- Restore Default Settings
- Keyboard Emulation Control
- Mouse Emulation Control
- Mouse Port Switching
- Monitor Re-detection
- HSM Summary Table
- Chapter 5 Keyboard Emulation
- Chapter 6 The Firmware Upgrade Utility
- Appendix
CS1942DP / CS1944DP User Manual
8
CS1942DP Rear View
CS1944DP Rear View
No. Component Description
1DCC Port
(Daisy Chain
Control)
This RJ-45 port is used to connect two units together
when setting up DCC mode for a quad-display mode.
See Quad-Display (DCC Mode), page 14 for
instructions.
2 Console Port
Section
The cables from your keyboard, mouse, monitors,
microphone, and speakers plug in here. Each
connector is marked with an appropriate icon to
indicate itself.
3 KVM Port Section The cables that link the switch to your computers
plug in here. Each KVM port section is comprised of
a microphone jack, speaker jack, USB Type B socket
and two DisplayPort connectors
4 Power Jack The power adapter cable plugs into this jack.
5 USB 3.1 Gen 1 Hub
USB peripherals (printers, scanners, drives etc.) plug
into this port. This USB 3.1 Gen 1 port features 5 Gbps
data transfer rates for compatible USB peripherals
.
1
23
4
6
5
1
23
46
5