User's Manual

Chapter 4. Hotkey Operation
29
HSM Summary Table
After invoking HSM (see page 24), key in one of the following keys to perform
the corresponding function:
Key Function
[F1] Sets the keyboard and mouse to SPC mode so that it can work
under special operating systems as a standard (104 key)
keyboard and mouse.
[F2] Enables Mac keyboard emulation.
[F3] Enables Sun keyboard emulation.
[F4] Print the switch’s current settings via a text editor or word
processor.
[F5] Performs a USB keyboard and mouse reset.
[F6] [n][n] [Enter] Sets the keyboard language layout. Where nn is a two digit
number that represents the keyboard language code (US
English: 33, French: 08, German: 09, Japanese: 15).
[F10] Enables Windows keyboard emulation.
[B] Toggles the beeper On and Off.
[E] Toggles the Power-on-Detection function on/off.
[H] Toggles between the default and alternate HSM invocation keys.
[M] Toggles between mouse emulation enable and disable.
[N] Toggles between keyboard emulation enable and disable.
[R] [Enter] Resets the Hotkey settings to their default status.
[T] Toggles between the default ([Scroll Lock] [Scroll Lock]) and
alternate ([Ctrl] [Ctrl]) Port Switching keys.
[u] [p] [g] [r] [a] [d]
[e] [Enter]
Invokes Firmware Upgrade Mode.
[W] Toggles between Mouse Port Switching enabled and disabled.
When enabled, click the mouse wheel twice to switch ports.
Mouse emulation must be enabled.
[X] [Enter] Enables/Disables the Port Switching keys.
[Esc] or
[Spacebar]
Quits and exits the setting mode.