User manual

CS1942 / CS1944 User Manual

HSM Summary Table

After invoking HSM (see page 20), key in one of the following keys to perform

the corresponding function:

Key Function

[B] Toggles the beeper On and Off.

[D] Invokes the Video DynaSync function, which stores the

console monitor’s EDID to optimize display resolution.

[E] Toggles between Power on Detection enable and

disable.

[H] Toggles between the default and alternate HSM

invocation keys.

[L] Switches the front panel USB function from Datalink

mode to Quick Charge mode.

[M] Toggles between mouse emulation enable and disable.

[N] Toggles between Keyboard Emulation mode enable and

disable.

[T] Toggles between the default and alternate Port

Switching keys.

[W] Toggles between Mouse Port Switching enabled and

disabled. When enabled, click the mouse wheel twice to

switch ports. Mouse emulation must be enabled.

[R] [Enter] Resets the hotkey settings to their default status.

[X] [Enter] Enables/Disables the Port Switching keys.

[u][p][g][r][a][d][e] [Enter] Invokes Firmware Upgrade Mode.

[F1] Sets the keyboard and mouse to SPC mode so that they

work under special operating systems as a standard

(104 key) keyboard and mouse.

[F2] Enables Mac keyboard emulation.

[F4] Print the switch’s current settings via a text editor or

word processor.

[F5] Performs a reset on all USB devices.

[F10] Auto detects the keyboard operating platform. Activates

Pass Through keyboard mode (see Keyboard Operating

Platform, page 22).