User manual

CS1942 / CS1944 User Manual
38
When switching ports,
the monitor does not
display.
Monitor is new or this
is the first time
installation.
Switch ports again and wait two or
more seconds for the PC’s EDID to
pass to the monitor.
The PC’s EDID has
not passed through to
the monitor when
switching ports
Use the [d] hotkey to invoke Video
DynaSync one more time or switch to
another PC to reconnect the CS1942 /
CS1944. See Video DynaSync,
page 24.
When switching ports,
there is a several
second delay before
the change happens.
This can occur when
keyboard emulation is
disabled.
Use the [F10] hotkey to enable
keyboard emulation. See Keyboard
Operating Platform, page 22.
Symptom Possible Cause Action