USB KVM Switch USER MANUAL CS62US / CS64US
EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy.
CS62US / CS64US User Manual Online Registration You can register your product at our online support center: International http://support.aten.com North America ATEN TECH http://www.aten-usa.com/ product_registration ATEN NJ http://support.aten.com Online Support International Email Support Online Support support@aten.com Technical Support http://support.aten.com Troubleshooting Documentation Software Updates http://www.aten.
Package Contents The CS62US / CS64US USB KVM Switch package contains the following items: 1 2-port CS62US USB KVM Switch or 1 4-port CS64US USB KVM Switch 1 Quick Start Guide Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it.
Overview The CS62US / CS64US takes a giant step forward from prior cable KVM models in the Petite series, by offering built-in cables, USB peripheral sharing, and a firmware upgrade function that allows you to keep up with latest available versions. The CS62US / CS64US also offers multiplatform support and computer selection via hotkeys to provide the ultimate in desktop convenience.
Features One USB console controls two/four USB computers USB mouse port can be used for USB hub and USB peripheral sharing Computer selection via hotkeys Hotkey selection for OS and keyboard language Audio-enabled Multiplatform support – Windows, Linux, Mac, and Sun Compact design, built-in all-in-one cables Superior video quality – up to 2048 x 1536; DDC2B Video DynaSyncTM – Exclusive ATEN technology eliminates boot-up display problems and optimizes resolution when swi
System Requirements Console A VGA, SVGA, or multisync monitor capable of the highest resolution that you will be using on any computer in the installation A USB Keyboard and a USB Mouse Speakers (optional) Computers The following equipment must be installed on each computer that is to be connected to the system: A VGA, SVGA, or multisync video port USB Type A port Speaker port (optional) Cables The CS62US / CS64US’s innovative design features built-in KVM and speaker cables for extra conveni
Operating Systems Supported operating systems are shown in the table, below: OS Windows Linux Version 2000 and higher RedHat 9.0 and higher SuSE 10 and higher Mandriva (Mandrake) 2006, 2007, 2008 UNIX Novell Debian 3.1, 4.0 Ubuntu 7.04, 7.10 FreeBSD 5.5, 6.1, 6.2 Sun Solaris 9 and higher Netware 5.0 and higher Mac OS 9 and higher DOS 6.
Components CS62US 2 3 1 4 KVM Cable Connectors 5 6 7 Note: The KVM cable connectors are the same on both models.
CS64US 2 1 3 4 No. Component Description 1 Port LEDs The port LEDs light to indicate that the computer attached to its corresponding port has the KVM focus. 2 KVM Cables These cables attach to the computers in your installation. 3 Speaker Jack Your console speakers plug in here. 4 Console Ports The cables from your console monitor, USB keyboard, and USB mouse plug into these ports.
Installation 1. Make sure that the power to any device that you connect to the installation has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. 2. Make sure that all devices you will be installing are properly grounded. Setting up the CS62US / CS64US USB KVM Switch is quick and easy. Refer to the installation diagrams on the following pages (the numbers in the diagrams correspond to the steps, below) and do the following: 1.
Installation Diagram 3 2 1 3 - 12 -
Port Switching All port switching operations begin by tapping the Scroll Lock key twice. See the following table for full details. Hotkey Action [Scroll Lock] [Scroll Lock] CS62US: Toggles the KVM and Audio focus between the two ports.
Invoking Hotkey Setting Mode (HSM) All hotkey operations begin by holding the Num Lock key, pressing and releasing the Minus key, then releasing the Num Lock key. See the the following tables for full details. Note: If using [Num Lock] [-] conflicts with other programs, [Ctrl] [F12] can be used instead. See Hotkey Summary Table, page 15, for details. Auto Scanning Model Hotkey Action CS62US [Num Lock] [-] [a] Starts Auto Scan. The KVM focus cycles from port to port at 5-second intervals.
Hotkey Summary Table Combination [Num Lock] [-] + Function [H] Toggles between the default [Num Lock] [-] and alternate [Ctrl][F12] HSM invocation keys. [T] Toggles between the default [Scroll Lock] [Scroll Lock] and alternate [Ctrl][Ctrl] port switching keys. [F2] Activates Mac keyboard mapping. [F3] Activates Sun keyboard mapping. [F10] Auto detects keyboard operating platform. [F4] Lists current switch settings via the paste function of a text editor.
Keyboard Emulation Mac Sun PC Keyboard Mac Keyboard PC Keyboard Sun Keyboard [Shift] Shift [Ctrl] [T] Stop [Ctrl] Ctrl [Ctrl] [F2] Again [Ctrl] [F3] Props [Ctrl] [1] [Ctrl] [F4] Undo [Ctrl] [2] [Ctrl] [F5] Front [Ctrl] [3] [Ctrl] [F6] Copy [Ctrl] [4] [Ctrl] [F7] Open [Ctrl] [F8] Paste [Alt] Alt [Print Screen] F13 [Ctrl] [F9] Find [Scroll Lock] F14 [Ctrl] [F10] Cut = [Ctrl] [1] [Enter] Return [Ctrl] [2] - [Backspace] Delete [Ctrl] [3] + [Insert] Help [Ctrl]
The Firmware Upgrade Utility To upgrade the CS62US / CS64US’s firmware, do the following: 1. From a computer that is not part of your KVM installation, download the latest Firmware Upgrade package for the CS62US / CS64US from our Internet support site (www.aten.com). 2. Invoke Firmware Upgrade Mode [Num Lock] [-] [Upgrade]. The LEDs flash together to indicate Firmware Upgrade Mode is in effect. Note: While the switch is in Firmware Upgrade Mode, normal keyboard and mouse functions are suspended.
Troubleshooting Symptom Mouse and/or Keyboard not responding. Possible Cause Improper mouse and/or keyboard reset. Action Unplug the cable(s) from the console port(s), then plug it/them back in. KVM switch Power off all devices on the needs to be reset. installation (see safety note, page 9); power off the KVM switch; wait five seconds; then power up USB devices not responding. USB ports need to Unplug the device’s USB cable reset. from the USB port on the switch’s rear panel, then plug it back in.
Factory Default Settings Setting Default Port Switching [Scroll Lock] [Scroll Lock] Hotkey Invocation [Number Lock] + [-] Auto Scan Interval 5 seconds Port Switching Keys ON Keyboard Operating Platform PC compatible LED Display Status Status Indication Off Port is not selected On Port is connected to an active computer Flashing (one) Port is connected to an active computer and is being accessed in Auto Scan Mode Flashing (all) Firmware Upgrade Mode is invoked - 19 -
Specifications CS62US CS64US Computer Connections Function 2 4 Console Connections 1 1 Port Selection Connectors Hotkeys Console Ports Keyboard 1 x USB Type A Female (White) Video 1 x HDB-15 Female (Blue) Mouse 1 x USB Type A Female (White) Speakers KVM Ports Video Speakers LEDs 1 x Mini Stereo Jack Female (Green) Keyboard / Mouse 2 x USB Type A Male (White) 4 x USB Type A Male (White) 2 x HDB-15 Male (Blue) 4 x HDB-15 Male (Blue) 2 x Mini Stereo Jack Female (Green) 4 x Mini Stereo
