User manual

- 14 -
Invoking Hotkey Setting Mode
(HSM)
All hotkey operations begin by holding the Num Lock key,
pressing and releasing the Minus key, then releasing the Num
Lock key. See the the following tables for full details.
Note: If using [Num Lock] [-] conflicts with other programs, [Ctrl]
[F12] can be used instead. See Hotkey Summary Table,
page 15, for details.
Auto Scanning
Note: To exit Auto Scan, press [Esc] or [Spacebar]. Auto
Scanning stops when you exit Auto Scan mode.
Model Hotkey Action
CS62US [Num Lock] [-]
[a]
Starts Auto Scan. The KVM focus cycles
from port to port at 5-second intervals.
CS64US [Scroll Lock]
[Scroll Lock] [a]
[Enter]
Starts Auto Scan. The KVM focus cycles
from port to port at 5-second intervals.
[Scroll Lock]
[Scroll Lock] [a]
[n] [Enter]
Starts Auto Scan. The KVM focus cycles
from port to port at n-second intervals.
Note: Replace n with a number between 1
and 99.