User manual

Installation
All installation involves is plugging cables into their appropriate ports.
Refer to the diagrams on the next page as you perform the following
steps:
1. Plug the keyboard, monitor, and mouse cables for the remote
console devices into their ports on the Console side of the KA9250.
2. Plug either end of the Category 5 cable into the KA9250’s Remote
I/O port. Plug the other end of the cable into the Remote Console
port of the KH0116 or KL0116.
3. Plug the power adapter (supplied with the KA9250) into an AC
source; plug the adapter’s power cable into the KA9250’s Power
Jack.
4. Power up your KH0116 or KL0116 installation according to the steps
given in the Installation section of its User Manual.
- 4 -
2003-01-17