Manual

Chapter 1. Introduction
11
KE6940R (Receiver) Front View
No. Component Description
1 Power LED Lights blue to indicate the module is turned on.
2 LAN LED Lights to indicate the network status:
 Lights Green when connected to the LAN.
 Off when not connected to the LAN.
 Blinks Green when the Ethernet connection is
active.
 Lights Orange to indicate high network bandwidth
(for ultra-high video) is being used.
3 Local LED Lights green to Indicate the Transmitter has KVM
access of the computer.
4 Remote LED Lights green to Indicate the Receiver has KVM access
of the computer.
5 Graphics Pushbutton Sets the displays image quality to the highest possible
grade, so that images are optimized.
6 OSD Pushbutton Use this pushbutton to open the OSD menu.
7 Video Pushbutton Sets the displays image quality to a grade that is
optimized for video playback.
8 USB port Use this port for virtual media or a USB peripheral
device.
Note: When using a USB disk plugged into this port,
see USB Mode, page 62.
1
43
2
Graphics
OSD
Video
POWER
LAN LOCAL
REMOTE
5
6
7
8