Manual

KE6900 / KE6940 User Manual
30
After entering the information, click Save.
RS232 Settings Configure the serial device settings for the User Station. The
default settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
Enable Media Select which type of media the User Station can stream from
Transmitters: Video, Audio, USB, and RS232.
Manager
Address
Set the IP address and Port number of the computer running
the Matrix Manager software. The default port number is 9110.
Beeper Check this box to allow the User Station to beep when
configuration changes are made to it.
USB Mode Select the type of USB device you will connect to the USB ports:
vUSB: Use this option to plug USB peripherals into the USB
ports. This option also allows a keyboard and mouse with
special functions to plug into the USB ports for console use. Use
this only if the special functions of the keyboard or mouse are
required but do not work when plugged into the console ports.
When the keyboard and mouse are plugged into the USB ports,
they will not work within the OSD menus. To work within the
OSD menus, the keyboard and mouse must be plugged into the
console ports.
VM (Virtual Media): Only select this option if you are plugging a
USB disk into the USB ports. This will give you the highest data
transfer speeds but will not allow other USB devices plugged
into the USB ports to work.
Secure: Check this box to encrypt USB drives plugged into the
USB ports.
Item Description