Manual

Chapter 7. Device Management
61
3. Click the Properties tab to configure the User Station’s properties:
Network
Configuration
For dynamic IP address assignment, select the Obtain IP
address automatically radio button.
To specify a fixed IP Address, Subnet Mask, and Default
Gateway select the Set IP address manually radio button and
fill in the fields with values appropriate for your network.
For information to configure the network settings locally on the
device see Network Configuration, page 23.
Item Description
Mode Select Extender mode for simple one-to-one (Transmitter to
User Station) setups that are managed with the Receiver’s OSD
menu.
Select Desktop/Matrix mode to manage devices and
connections from the Matrix Manager. This mode is for
advanced administration of Transmitter to User Station
connections. (See Target Connections, page 74)
Properties If you selected Extender mode (above) set the Transmitter IP
address for the User Station’s Video, Audio, USB, and RS232
source signals.
If you selected Desktop/Matrix mode (above) the Properties
will be grayed out. Use Targets to configure the Transmitter
connections. (See Target Connections, page 74)
Item Description