Manual

KE6900 / KE6940 User Manual
62
RS-232 Settings Configure the settings for the serial device the User Station will
be connecting to. The default settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
Enable Media Select which source type the User Station can stream : Video,
Audio, USB, and RS232.
Manager
Address
Set the IP address and Port number of the computer running
the Matrix Manager software. The default port number is 9110.
Login Required Check this box to require a username and password on the
User Station’s OSD to access the Connection Page (see
page 38).
Note: WARNING! If you uncheck Login Required you must
select an Anonymous User in Global Settings. Otherwise a
system login error may occur on the User Station’s OSD.
(See User Station Login Settings, page 100)
Beeper Check this box for the Receiver to beep when configuration
changes are made.
USB Mode Select the type of USB device you will connect to the USB ports:
vUSB: Use this option to plug USB peripherals into the USB
ports. This option also allows a keyboard and mouse with
special functions to plug into the USB ports for console use. Use
this only if the special functions of the keyboard or mouse are
required but do not work when plugged into the console ports.
When the keyboard and mouse are plugged into the USB ports,
they will not work within the OSD menus. To work within the
OSD menus, the keyboard and mouse must be plugged into the
console ports.
VM (Virtual Media): Select this option only if you are plugging a
USB disk drive (including USB HDD/optical disk) into the USB
ports. This will give you the highest data transfer speeds but will
not allow other USB devices to work when plugged into the USB
ports.
Secure: Check this box to encrypt USB disk drives plugged into
the USB ports.
Item Description