Manual

KE6900 / KE6940 User Manual
66
4. Use the Video 1 drop-down menu to select the Receiver that will have
keyboard and mouse access to the computer.
Note: All Receivers can switch KVM access to other Transmitters but only
Video 1 has keyboard and mouse access to the computer for the group.
5. Use the Video 2, Video 3 and Video 4 drop-down menus to select the
other Receivers for the group.
6. Click Save. The group appears in the Sidebar.
7. On the menu bar, go to Targets.
8. Add a new Target.
9. Set the Source Stream to map the Transmitters to the Rx Video Group
Receivers, as such: KVM Transmitter
→ Video 1; Video 2 → Video 2;
Video 3
→ Video 3; Video 4 → Video 4.
 Use the KVM Transmitter drop-down menu to select the Transmitter
connected to the computer’s keyboard and mouse ports.
 Use the Video 2, Video 3 and Video 4 drop-down menus to select the
other Transmitters connected to the computer.
 Use the Audio, USB and Serial drop-down menus to select the
Transmitter for each source signal. The Transmitter selected sends the
signal to the Receiver set with the same Video #.
10. Configure the remaining Target settings (see Adding a Target, page 76).
11. Click Save.