Manual

Chapter 7. Device Management
69
Configuring a Transmitter
A Transmitter’s settings can be modified from the Transmitters main page.
Changes that are saved are updated on the Transmitter device across the
network. To configure a Transmitter:
1. Select a Transmitter and click Modify.
2. The Network tab appears with the Transmitter’s IP address settings:
Item Description
IP Installer The IP Installer is an external Windows-based utility for
assigning IP addresses to the device. Click one of the radio
buttons to select Enable, View Only, or Disable for the IP
Installer utility. (See IP Installer, page 137)
For security, we strongly recommend that you set this to View
Only or Disable after each use.