Manual

KE6900 / KE6940 User Manual
72
4. Click the System tab configure the general settings:
Transmitter
Video Attributes
These refer to the Transmitter’s video settings:
Video Type: Select the DVI video connector being used by the
display: Digital (DVI-D) or Digital (DVI-I).
Color Depth: Select the number of bits to use for the color
depth: 24, 16, or 8. This is the number of bits used to describe
the color of a single pixel. A bit depth determines the number of
colors that can be displayed at one time.
Bandwidth Limit: Select the maximum bandwidth that the
Transmitter can use to transmit video over the network. A lower
bandwidth transmits lower quality video; a higher bandwidth
sends higher quality video but this can affect network speed.
Video Quality: Select the video quality to use. 5 is the highest
video quality, and 1 is the lowest video quality. Options are: 1~5.
Background Refresh: Sets how often the Transmitter
refreshes the background image on the connected display.
Options are to refresh every 256,128, 64, 32,16, or 0 frames.
Beeper Check this box for the Transmitter to beep when a configuration
change is made.
Occupy Timeout Set a time threshold for User Stations whose Access Mode has
been set to Occupy If there is no activity from the User Station
occupying the port for the amount of time set here, the User
Station is timed out and the port is released. The first User
Station to send keyboard or mouse input after the port has been
released gets to occupy the port. Input a value from 1 to 240
seconds.
Item Description