Manual

Chapter 8. User Management
87
3. At this point you can assign the new user to a group by selecting the
Groups tab – the Groups page is discussed on page 91. You can also assign
the user’s Targets and Groups access rights by selecting the Devices tab –
the Devices page is discussed on page 95.
Note: Optionally, you can skip this step now to add more users and create
groups, and come back to it later.
4. When your selections have been made click Save.
5. When the Operation Succeeded message appears, click OK.
6. Click Users in the Sidebar to return to the main screen. The new user
appears in the Sidebar list and in the main panel, as well.
 The Sidebar Users list can expand and collapse. If the list is expanded,
click the minus symbol ( – ) next to the Users icon to collapse it; if it is
collapsed there is a plus symbol ( + ) next to the icon. Click the plus
symbol to expand it.
 The icon for administrators is orange; the icon for users is green.
 The large main panel shows the user’s name; the description that was
given when the account was created; and whether the account is
currently active or has been disabled.
Password From 0 to16 characters are allowed depending on the
Account Policy settings.
Confirm Password To be sure there is no mistake in the password, you are
asked to enter it again. The two entries must match.
Description Additional information about the user that you may wish to
include.
Role There are two categories: Administrator and User.
 The Administrators have full access to make changes
within the Matrix Manager, which includes adding and
removing Transmitters and Receivers, user accounts,
preferences, and configuration settings.
 The Users can log in from User Stations to access
Transmitters.
Status Status allows you to control the user’s account and access
to the installation, as follows:
 Disable Account lets you suspend a user’s account
without actually deleting it, so that it can be easily
reinstated in the future.
Field Description