User manual

Chapter 13. RS-232 Port Operation

175

This command is used to list the KVM port information for all or specified

switch ports. The LP command lists the port #, Power On / Off, and port name.

The available command are:

LP ALL

LP ON

LP OFF

LP XX

Where:

 ALL -lists the port information for all ports on the switch.

 ON -lists port information for ports connected to the switch, which are

powered on.

 OFF -lists port information for ports connected to the switch, which are

powered off.

 XX is a two-digit number that represents the particular port number(s),

and/or switch that you want to list information for.

For example, LP 01 lists the port information for port number 01.

For example, LP C1-12 lists the port information on Chain 1, for port

number 12.