User manual

Chapter 6. Device Management
47
When you have finished making your settings, click Save.
Root
Device
Settings
Web Session
Timeout
When a user is logged in via a web browser and there is
no input from the user for the amount of time set with this
function, the user is automatically logged out and will
need to log in again.
Dual Root
Slave
Ordinarily the KM0932 supports 9 consoles and 32 ports.
You can achieve an 18 console setup (by connecting 2
switches together on the same LAN segment, and an
additional 2-4 switches connected down from the first
layer), designating on the first layer- one switch as the
Master and another as the Slave. If you have set up this
kind of configuration and this switch is to be the Slave, put
a check mark in this checkbox, then set the Dual Root
Master IP Address. (See Dual Root, page 48)
Dual Root
Master IP
Key the IP address of the master switch into the Dual
Root Master IP input box. The Dual Root Slave checkbox
must first be selected before the Dual Root Master IP can
be entered. (See Dual Root, page 48)
Item Meaning