User manual

KM0032 / KM0532 / KM0932 User Manual

IP Installer

The IP Installer is an external Windows-based utility for assigning IP addresses

to the KM0032 / KM0532 / KM0932. See IP Installer, page 185 for details.

Click one of the radio buttons to select Enable, View Only, or Disable for the

IP Installer utility.

See IP Installer, page 185, for IP Installer details.

Note: 1. If you select View Only, you will be able to see the KM0032 /

KM0532 / KM0932 in the IP Installer’s Device List, but you will not

be able to change the IP address.

2. For security, we strongly recommend that you set this to View Only

or Disable after use.

Service Ports

As a security measure, if a firewall is being used, the super administrator needs

to specify the port numbers that the firewall will allow. Users must indicate the

port number when they log in. If an invalid port number (or no port number) is

given, the KM0032 / KM0532 / KM0932 will not be found. An explanation of

the fields is given in the table below:

Note: 1. If there is no firewall (on an Intranet, for example), it doesn’t matter

what these numbers are set to, since they have no effect.

2. The service ports cannot have the same value. You must set a

different value for each one.

IP Address

The KM0032 / KM0532 / KM0932 can either have its IP address assigned

dynamically (DHCP), or it can be given a fixed IP address.

 For dynamic IP address assignment, select the Obtain IP Address

Automatically radio button.

 To specify a fixed IP address, select the Set IP Address Manually radio

button and fill in the IP address with values appropriate for your network.

Field Explanation

HTTP The port number for a browser login. The default is 80.

HTTPS The port number for a secure browser login. The default is 443.