User manual

Chapter 6. Device Management
63
TACACS Settings
 TACACS Authentication and Authorization Settings
To allow authentication and authorization via TACACS, refer to the
information in the table, below:
Item Action
Enable Put a check in the Enable checkbox to allow TACACS+
authentication and authorization.
Preferred
TACACS+ Server
and Service Port
Fill in the IP address and port number for the TACACS+ server.
 You can use the IPv4 address, or the domain name in the
TACACS Server field.
 Enter the Service Port for the TACACS+ server port
Alternate
TACACS+ Server
and Service Port
Fill in an alternative IP address and port number for the
TACACS+ server to use.
 You can use the IPv4 address, or the domain name in the
TACACS+ Server field.
 Enter the Service Port for the TACACS+ server port
Shared Secret Enter the TACACS+ shared secret (must be at least 6
Characters)