User manual

KM0032 / KM0532 / KM0932 User Manual
72
MultiView Groups
For multiple consoles to simultaneously access a computer connected by
multiple video cards to multiple ports on the switch, the consoles and ports
must be added to groups. The consoles must be added to a Console Group and
the ports must be added to an IO Group, respectively. Once both groups are
created, the consoles will automatically connect to the corresponding IO Group
port: Main IO, Member 1, Member 2, or Member 3. The Main Console will
have Full KVM access, while the remaining group consoles will have View
Only access. To create Multiview groups follow the instructions on the pages
that follow.
Creating IO Groups
To create an IO Group, do the following:
1. From the IO Groups section click Add, then drag and drop the associated
ports from the port selection tree list into the Main IO, Member 1, Member
2, and or Member 3 sections of the IO Group (Browser UI).
– or –
Select the associated ports from the sidebar, then use the arrow buttons
under Add to Group to select ports to add into the Main IO, Member 1,
Member 2, and or Member 3 sections of the IO Group, and click Add
(Console UI).
Browser UI: Add to IO Group