User manual
Table Of Contents
- KN1108v / KN1116v User Manual
- Introduction
- Hardware Setup
- Super Administrator Setup
- Logging In
- The User Interface
- The Web Browser Main Page
- Laptop USB Console Main Page
- The AP GUI Main Page
- The Local Console GUI Main Page
- The Control Panel
- Port Access
- User Management
- Device Management
- Log
- Maintenance
- Download
- Port Operation
- The Log Server
- Appendix
- Safety Instructions
- Consignes de sécurité
- Technical Support
- Specifications (English)
- Technische Daten (Deutsch)
- Troubleshooting
- IP Address Determination
- IPv6
- Port Forwarding
- Keyboard Emulation
- PPP Modem Operation
- Internal Serial Interface Configuration
- Additional Mouse Synchronization Procedures
- Additional Video Resolution Procedures
- Trusted Certificates
- Self-Signed Private Certificates
- Clear Login Information
- Factory Default Settings
- Serial Adapter Pin Assignments
- Supported KVM Switches
- Supported Power Over the Net™ Units
- Virtual Media Support
- Limited Warranty
KVM Over the NET™ User Manual
86
The Connections page is organized into several main areas. All the devices,
ports, and outlets, including the unit’s COM1 and COM2 ports, that a user is
permitted to access are listed in the Sidebar at the left of the page. In addition
to KN1108v / KN1116v listings, if any PON (Power Over the Net™) devices
are connected to the switches they are listed separately below the switch
listings. If any Blade Servers have been deployed, they are listed separately
below the PON devices.
Configuration and operation of KVM devices and ports are discussed on
page 92; configuration and operation of the COM ports is discussed on
page 95, configuration and operation of PON devices and outlets are discussed
on page 99; configuration and operation of Blade Servers are discussed on
page 104
Note: Power Over the Net™ devices are also referred to as PDUs (Power
Device Units).
After selecting a device, port, or outlet in the Sidebar, clicking entries on the
menu bar (Browser GUI) or tab bar (AP GUI) opens information and
configuration pages related to the item selected in the Sidebar.