User manual
Table Of Contents
- KN1108v / KN1116v User Manual
- Introduction
- Hardware Setup
- Super Administrator Setup
- Logging In
- The User Interface
- The Web Browser Main Page
- Laptop USB Console Main Page
- The AP GUI Main Page
- The Local Console GUI Main Page
- The Control Panel
- Port Access
- User Management
- Device Management
- Log
- Maintenance
- Download
- Port Operation
- The Log Server
- Appendix
- Safety Instructions
- Consignes de sécurité
- Technical Support
- Specifications (English)
- Technische Daten (Deutsch)
- Troubleshooting
- IP Address Determination
- IPv6
- Port Forwarding
- Keyboard Emulation
- PPP Modem Operation
- Internal Serial Interface Configuration
- Additional Mouse Synchronization Procedures
- Additional Video Resolution Procedures
- Trusted Certificates
- Self-Signed Private Certificates
- Clear Login Information
- Factory Default Settings
- Serial Adapter Pin Assignments
- Supported KVM Switches
- Supported Power Over the Net™ Units
- Virtual Media Support
- Limited Warranty
Chapter 8. Device Management
147
For the Keyboard/Mouse Broadcast setting, drop down the list to make
your choice.
If you enable Keyboard Broadcast, your keystrokes will be duplicated
on all the attached servers that currently appear in the Sidebar.
If you enable Mouse Broadcast, your mouse movements and clicks
will be duplicated on all the attached servers that currently appear in
the Sidebar.
Note: 1. On a KVM switch that is cascaded from the KN1108v /
KN1116v switch, only one port can perform a Keyboard/
Mouse broadcast at a time.
2. For Mouse Broadcast, you and all the servers must be running
the same OS; all the monitors must have the same resolution;
and all the screens must have an identical layout.
The Console Keyboard Language setting lets you specify which keyboard
mapping is being used by the Local Console keyboard. Drop down the list
to make your choice.