User manual

KVM Over the NET™ User Manual
152
 IPv6 Settings
 IP Address:
IPv6 is the new (128-bit) format for specifying IP addresses. (See IPv6,
page 246 for further information.) The KN1108v / KN1116v switch can
either have its IPv6 address assigned dynamically (DHCP), or it can be
given a fixed IP address.
 For dynamic IP address assignment, select the Obtain IP address
automatically radio button. (This is the default setting.)
 To specify a fixed IP address, select the Set IP address manually
radio button and fill in the fields with values appropriate for your
network.
 DNS Server
 For automatic DNS Server address assignment, select the Obtain
DNS Server address automatically radio button.
 To specify the DNS Server address manually, select the Set DNS
server address manually radio button, and fill in the addresses for
the Preferred and Alternate DNS servers with values appropriate
for your network.
Note: Specifying the Alternate DNS Server address is optional.
Network Transfer Rate
This setting allows you to tailor the size of the data transfer stream to match
network traffic conditions by setting the rate at which the KN1108v / KN1116v
switch transfers data between itself and the client computers. The range is from
4–99999 Kilobytes per second (KBps).
Finishing Up
After making any network changes, be sure Reset on exit on the Device
Management
→ System Operation page (see Reset on exit:, page 197) has been
enabled (there is a check in the checkbox), before logging out. This allows
network changes to take effect without having to power the switch off and on.