User manual

Chapter 8. Device Management
161
When you have finished making your settings on this page, click Save.
Emergency Dial
Out
If the KN1108v / KN1116v switch gets disconnected from the
network, or the network goes down, this function puts the switch on
line via the ISP dial up connection.
 If you choose PPP stays online until network recovery, the PPP
connection to the ISP will last until the network comes back up or
the switch reconnects to it.
 If you choose PPP online time, the connection to the ISP will
terminate after the amount of time that you specify is up. A setting
of zero means it is always on line.
Dial Out Mail
Configuration
This section provides email notification of problems that occur on
the devices connected to the KN1108v / KN1116v switch's ports (see
SMTP Settings, page 153).
Note: This email notification differs from the one configured under
SMTP Settings, page 153, in that it uses the ISP mail server rather
than the internal company’s mail server.
 Key in the IPv4 address, IPv6 address, or domain name of your
SMTP server in the SMTP Server IP Address field.
 Key in the email address of the person responsible for the SMTP
server (or some other equally responsible administrator), in the
Email From field.
 Key in the email address (addresses) of where you want the
report sent to in the To field. If you are sending the report to more
than one email address, separate the addresses with a comma or
a semicolon.
 If your server requires a secure SSL connection, put a check in
the SMTP server requires secure connection (SSL) checkbox
 If your server requires authentication, put a check in the SMTP
server requires authentication checkbox, then key in the
appropriate account name and password in the fields, below.
Item Action