User manual

Chapter 5. The User Interface
71
Virtual Media
The Virtual Media feature allows a drive, folder, image file,
removable disk, or smart card reader on a user’s system to appear and
act as if it were installed on the remote server.
Note: 1. Virtual Media is only supported on remote servers that use KA7166,
KA7168, KA7169, KA7175, KA7176 or KA7177 adapter cables
with V-Series KVM Over the NET™ switches.
2. The Virtual Media icon changes depending on the status of the virtual
media function, as shown in the table below:
Mounting Virtual Media
To mount a virtual media device, do the following:
1. Click this icon to bring up the Virtual Media dialog box:
Icon Function
The icon displays in gray to indicate that the virtual media
function is disabled or not available
The icon displays in blue to indicate that the virtual media
function is available. Click the icon to bring up the virtual
media dialog box.
The icon displays in blue with a red X to indicate that a virtual
media device has been mounted on the remote server. Click
the icon to unmount all redirected devices.