User manual

Chapter 7. Device Management

The Login String entry field is used to specify a login string (in addition to the

IP address) that users must include when accessing the Power Over the NET™

device with a browser. For example:

192.168.0.126/abcdefg

 The following characters are allowed:

0–9 a–z A–Z ~ ! @ $ & * ( ) _ + - = [ ] ; ' , .

 The following characters are not allowed:

 ^ { } ‘ ’ < > | " % ” : / ? # \ [Space]

 Compound characters (É Ç ñ ... etc.)

Note: 1. There must be a forward slash between the IP address and the string.

2. If no login string is specified here, anyone will be able to access the

Power Over the NET™ device login page using the IP address alone.

This makes your installation less secure.

For security purposes, we recommend that you change this string occasionally.

IP and MAC Filtering

If any filters have been configured, they appear in the IP Filter and/or MAC

Filter list boxes.

IP and MAC Filters control access to the Power Over the NET™ device based

on the IP and/or MAC addresses of the client computers attempting to connect.

A maximum of 100 IP filters and 100 MAC filters are allowed.

To enable IP and/or MAC filtering, click to put a check mark in the IP Filter

Enable and/or MAC Filter Enable checkbox.

 If the include button is checked, all the addresses within the filter range are

allowed access; all other addresses are denied access.

 If the exclude button is checked, all the addresses within the filter range

are denied access; all other addresses are allowed access.