User manual

Chapter 11. Out of Band Operation
117
4. For the Connect using: field, select Direct to COM1 (assuming you are
using COM1 on your computer), then click OK. A Port Setting dialog box
similar to the one below comes up:
5. Fill in the settings so that the match the ones you specified for the PN7212
/ PN7320's console port settings on the OOBC page (see Console Port
Settings, page 79), then click OK.
6. When the HyperTerminal screen appears, open its File menu and select:
Properties → Settings. A dialog box, similar to the one below, displays: