User manual

PN7212 / PN7320 User Manual
124
3. Change the dialog box settings so that your radio buttons and check boxes
match the ones in the diagram.
4. Click OK to leave the dialog box; then click OK again.
This completes the modem connection setup.
Logging In
1. On the Device Management OOBC page, make sure that the Enable Dial
In radio button is selected. (See Dial In / Dial Back Settings, page 81.)
2. Double click the icon you created in the Dial-up Network folder (see
page 122).
3. Key in your Username and Password; click Connect and wait for the
Authentication procedure to complete (be patient, it may take a few
moments).
4. Use your browser to access the PN7212 / PN7320 the same way as if you
were accessing it over a LAN or WAN.