User manual

PN7212 / PN7320 User Manual
128
Third Party Utility (Windows):
SSH sessions can be implemented under Windows with the use of third party
utility software, such as PuTTY, a free implementation of Telnet and SSH for
the Win32 and Unix platforms. To make an SSH connection with PuTTY, do
the following:
1. In the Host Name box, enter the Internet host name or IP Address of the
server you want to connect to.
2. Select SSH from the Protocol buttons.
3. Click Open (at the bottom of the dialog box)
4. After you have connected, provide your PN7212 / PN7320 username and
password at the login prompts.
Note: If you make a mistake keying in the username, the SSH protocol
doesn't allow you to try again. You must close PuTTY and start over.
Once an SSH connection to the device is established, the PN7212 / PN7320’s
text-based Configuration Menu comes up. This menu is the same as the
configuration menu that appears with Telnet sessions (see page 126).