User manual

PN7212 / PN7320 User Manual
138
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
PN7212 / PN7320 in order to give it an IP address that users can connect to.
There are two methods to choose from. In each case, your client computer must
be on the same network segment as the PN7212 / PN7320. After you have
connected and logged in you can give the device its fixed network address.
(See Network, page 65.)
Method 1:
For computers running Windows, an IP address can be determined and/or
assigned with the IP Installer utility. The utility can be obtained from the
Download area of our web site. Look under Driver/SW, and the model of your
device. After downloading the utility to your computer, do the following:
1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
3. Select the device in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The PN7212 / PN7320's MAC address
is located on its bottom panel.