User manual

Chapter 1. Introduction

Note: The Front View diagram depicts a PN7320. The PN7212 is basically the

same, except there are only 12 AC power sockets (6 on each side of the

Port and LED panel), and all the sockets are NEMA 5-15R or IEC320

C13. There are no NEMA 5-20R or IEC320 C19 sockets.

No. Item Description

1 Power Sockets NEMA 5-15R

– or –

IEC320 C13

2 Port and LED

Panel

Details of this section are provided below and on the

following page.

3 Power Sockets NEMA 5-20R

– or –

IEC320 C19

4 Circuit Breakers

(PN7320 Only)

As a safety measure, if there is an overcurrent situation

regarding the device’s power, the circuit breakers will trip.

Press the button to recover normal operation.

Note: Circuit breakers are not provided on the PN7212.

Therefore, we strongly recommend that you do not plug the

unit directly into any unprotected power source (such as a

wall outlet).

5 Grounding

Terminal

The wire used to ground the unit connects here.

Note: The grounding terminal does not appear in the

diagram. It is hidden by the power cord.

6 Power Cord Plug the cord into your AC source.