User manual

Chapter 5. Outlet Access
35
Server Diagnosis
The outlet’s Server Diagnosis page allows you to use an ICMP ping command
to check if the outlet is functioning properly.
This function is detailed in the following table:
Schedule
The outlet’s Schedule page shows the date and time schedule settings for
automatic power control of the outlet.
To configure the schedule, select Configuration at the far right of the menu bar.
See Schedule, page 47 for details
Enable Put a check in the checkbox to enable this function.
Ping
Address
Enter the IP address of the outlet to be pinged in this field.
Interval This field sets how often the specified outlet is pinged, in second
intervals. Enter a value between 1 and 255.
Fail Count This field sets how many times the outlet is allowed to fail to respond to
the ping before an action is taken (see below). Enter a value between 1
and 99.
Action This field sets what action is taken if the outlet fails to respond to a
specified number of pings. Select one of the following actions from the
drop-down menu:
Send email: This sends an email using the SMTP server setting. For
this function to work, you must also enable reports from the SMTP
server. See SMTP Settings, page 69 for details.
No action: Select this option to do nothing if the specified device fails to
respond.