User manual

Chapter 5. Outlet Access
41
General
When the Configuration page opens, the station’s General page is selected.
This page allows you to set up a power management configuration for the
device as a whole. The meanings of the field headings are given in the
following table:
Heading Meaning
Device Name To make things more convenient on a multi-station
installation, each station can be given a distinctive name.
To name a station key in the name of your choice - up to
32 letters and numbers.
Load Alarm A checkmark in the check box disables an alarm from
being triggered when the device’s current load falls
outside of its specified range.
Environment Alarm A checkmark in the check box disables an alarm from
being triggered when the device’s current load falls
outside of its specified range.
Device Threshold Settings These fields are used to set the maximum, minimum, and
fluctuation threshold settings for the Device. If a range
falls below the minimum setting, or exceeds the
maximum setting an alarm is triggered.
In order to keep alarms from being constantly triggered
due to slight fluctuations at the threshold points, you can
set a fluctuation range that must be exceeded when a
threshold is crossed in order for the alarm to be triggered.
For example, if there is a temperature threshold of 32
o
and you set a fluctuation range of 2
o
, there won’t be an
alarm triggered if the temperature fluctuates back and
forth between 31 and 32
o
.
Temperature Unit Click a radio button to choose the temperature unit for the
temperature sensor.
Bank Threshold Settings These fields are used to set the maximum, minimum, and
fluctuation threshold settings for the Banks. These
operate the same way as the Device Threshold Settings,
above.