User manual

PN7212 / PN7320 User Manual

TACACS+

To allow authentication and authorization for the Power Over the NET™

device through a TACACS+ server, do the following:

1. Check Enable.

2. Fill in the IP addresses and port numbers for the Preferred and Alternate

TACACS+ servers. The default port number is 49.

Note: Make sure that the port numbers you specify here match the port

numbers used by the TACACS+ servers.

3. In the Shared Secret field, key in the character string that you want to use

for authentication between the Power Over the NET™ device and the

TACACS+ Server.

Finishing Up

When you have finished making your settings on this page, click Save.