USB-C Dual-View Mini Dock USERMANUAL UH3233
EMC Information Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy.
UH3233 User Manual Online Registration International http://eservice.aten.com Telephone Support International 886-2-8692-6959 China 86-400-810-0-810 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America 1-888-999-ATEN ext 4988 1-949-428-1111 Technical Support For international online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com For North American technical support: Email Support Online Technical Support support@aten-usa.
Package Contents The UH3233 USB-C Dual-HDMI Mini Dock package contains the following items: 1 UH3233 USB-C Dual-HDMI Mini Dock 1 USB-C to USB-C Cable 1 User Instructions* Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it.
Overview The ATEN UH3233 USB-C Dual-HDMI Mini Dock transforms your USB-C device into a dual monitor workstation, and is compliant with the latest USB 3.1 Gen 1 Type-C specifications. The UH3233 can route video from a source device to one HDMI monitor for 4K resolution or to two HDMI monitors, splitting the video transmission for a dual-view display via a single cable for a resolution of 1920x1080 on each HDMI monitor.
Features Connects a computer to two HDMI monitors with Dual-View output USB 3.1 Gen 1 compliant Supports 4K (UHD) resolution via single display output* Supports dual-display video output up to 1920 x 1080 simultaneously* USB 3.1 Gen 1 port with data transfer rates up to 5 Gbps Plug and Play – no drivers or external power adapter needed * See System Requirements.
System Requirements Hardware A USB Type-C or Thunderbolt™ 3 USB Type-C compatible computer* Two HDMI monitors Note: 1. For video output to work through a USB-C port, it must support DP Alt Mode. 2. For Dual-View to work, the computer’s onboard graphics module or video source requires DisplayPort 1.2 with MST+HBR2 compatibility to support video output under extended mode. (Mac computers do not include MST technology and will therefore not support Dual-View mode.) Software Windows® 10 Mac iOS 10.
Components UH3233 Front View 1 2 Rear View 3 No. Component 4 5 Description 1 Power / Status LED This LED lights Blue to indicate the UH3233 is powered on, or Orange to indicate that the UH3233 isn’t receiving sufficient power from the computer to supply power to the device connected to the USB 3.1 Gen 1 Type-C port. 2 USB 3.1 Gen 1 Type-C Port This port is used to connect a USB Type-C or Thunderbolt™ 3 USB Type-C compatible laptop via a USB-C cable. 3 USB 3.
Installation 1. Make sure that the power to any device that you connect to the installation has been turned off. 2. Make sure that all devices you will be installing are properly grounded. To set up the UH3233, use the diagram on the next page (the numbers in the diagram correspond with the numbered instructions below), and do the following: 1. Use the USB-C to USB-C cable (included with the package) to connect the laptop's USB-C port to the UH3233. Note: 1.
1 2 3 4 - 10 -
Specifications Function UH3233 Computer Connections 1 Connectors Computer 1 x USB-C Female (Black) Device 1 x USB 3.1 Gen 1 Type A Female (Blue) Video Output 2 x HDMI Female (Black) LEDs Power Video Resolution 1 (Blue/Orange) Single View1 Dual View2 HDMI 3840 x 2160 @ 30 Hz HDMI 1920 x 1200 @ 60 Hz HDMI 1920 x 1200 @ 60 Hz 1 For video output to work through a USB-C port, it must support DP Alt Mode.
Limited Warranty ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two [2] years (warranty period may vary in certain regions/countries) commencing on the date of original purchase. This warranty period includes the LCD panel of ATEN LCD KVM switches. Select products are warranted for an additional year (see A+ Warranty for further details). Cables and accessories are not covered by the Standard Warranty.