VGA/DVI/HDMI EDID Emulator VC010 / VC060 / VC080 User Manual www.aten.
VC010 / VC060 / VC080 User Manual EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
VC010 / VC060 / VC080 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.
VC010 / VC060 / VC080 User Manual Package Contents The VC010 / VC060 / VC080 VGA/DVI/HDMI EDID Emulator package consists of: 1 VC010 / VC060 / VC080 VGA/DVI/HDMI EDID Emulator 1 RS-232 Configuration Cable 1 USB to DC Power Cord 1 User Instructions* Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer.
VC010 / VC060 / VC080 User Manual Contents EMC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . .
VC010 / VC060 / VC080 User Manual Display Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Audio Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Vendor Specific Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Detail Timing / Display Description . . . . . . . . . . . . . . . . . . . . . . . . 19 Saving your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 About .
VC010 / VC060 / VC080 User Manual About this Manual This User Manual is provided to help you get the most from your VC010 / VC060 / VC080 system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Chapter 1, Introduction, introduces you to the VC010 / VC060 / VC080 system. Its purpose, features and benefits are presented, and its front and back panel components are described.
VC010 / VC060 / VC080 User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. [] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps.
Chapter 1 Introduction Overview With various monitors and video display devices available in the market, much emphasis is placed on how quickly video resolution is optimized to get the best picture quality. Storing the EDID (Extended Display Identification Data) of video output devices facilitates a video resolution “handshake” between the display monitor and the computer/source device.
VC010 / VC060 / VC080 User Manual Features Superior video quality – HDTV resolutions of 480i, 480p, 720i, 720p, 1080i, 1080p (1920 x 1080); VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200) EDID Wizard – provides users with an easy way to manage EDID settings Consumer Electronics Control (CEC) allows interconnected HDMI devices to communicate and respond to one remote control (VC080) EDID mode selection – Default, Learning, and Programming HDMI (3D, Deep Color), HDCP compatible (VC080) Support
VC010 / VC060 / VC080 User Manual Requirements The following equipment is required for a complete VC010 / VC060 / VC080 installation: Source Devices(s) One of the following, depending on the unit you have: VC010: VGA device and HDB-15 connector with 3.
VC010 / VC060 / VC080 User Manual Components Top View 1 2 No. 1 Component EDID Set LEDs Description The LEDs indicate the active EDID configuration of the unit. LED 1 - the EDID is set to the ATEN default configuration LED 2 ~ 4 - the EDID is customized; the EDID settings can be configured using the EDID Learn Pushbutton or via the EDID Wizard and stored for later use (as 2, 3 or 4). See EDID Wizard, page 10 for steps on how to configure the EDID settings via the EDID Wizard.
VC010 / VC060 / VC080 User Manual Front View VC010 1 2 1 2 1 2 VC060 VC080 No. Component Description 1 RS-232 port Connect one end of the provided RS-232 Configuration Cable to this port and the other end to your PC’s serial port for RS-232 Command Control. 2 VGA IN port / Connect your VGA / DVI / HDMI source device to this port.
VC010 / VC060 / VC080 User Manual Rear View VC010 1 2 1 2 1 2 VC060 VC080 No. 1 Component VGA OUT port / Description Connect your VGA / DVI / HDMI display to this port. DVI OUT port / HDMI OUT port 2 6 Power Jack Plug in the power adapter to the power jack and use the switch to power on the VC010 / VC060 / VC080.
Chapter 2 Hardware Setup 1. Important safety information regarding the placement of this device is provided on page 27. Please review it before proceeding. 2. Make sure that the power to all devices connected to the installation are turned off. 3. Make sure that all devices you will be installing are properly grounded. Installation Installation of the VC010 / VC060 / VC080 is simply a matter of plugging in the appropriate cables.
VC010 / VC060 / VC080 User Manual 4. (Optional) To edit the VC010 / VC060 / VC080 system settings through the RS-232 port, connect the hardware / software controller here using the provided RS-232 Configuration Cable. 3 2 1 VC010 4 VGA Source Device VGA Output Device 3 2 4 1 VC060 DVI Source Device DVI Output Device 3 4 1 VC080 2 HDMI Output Device HDMI Source Device This completes the basic installation of the VGA/DVI/HDMI EDID Emulator.
Chapter 3 Operation Overview The VGA/DVI/HDMI EDID Emulator offers an easy and flexible EDID selection method using the front panel pushbuttons. You can select the default ATEN EDID configuration or one of three customized EDID settings (stored via the EDID Learn Pushbutton or the EDID Wizard). Upgrade the firmware conveniently through the RS-232 serial interface. The VC010 / VC060 / VC080 is set to use the ATEN EDID configuration by default at initialization.
VC010 / VC060 / VC080 User Manual EDID Wizard The EDID Wizard application can downloaded from the ATEN website. It enables users to view detailed information about the attached display and edit them accordingly. Save time by using the EDID Wizard to automatically retrieve a display's EDID. Furthermore, you can use the EDID Wizard to preconfigure up to 3 EDID settings for later use, thus eliminating delays when changing displays. EDID Wizard Menu The OSD menu options are shown in the table below.
VC010 / VC060 / VC080 User Manual Main Page After downloading and installing, run the VC010 / VC060 / VC080’s EDID Wizard application to display the EDID main page.
VC010 / VC060 / VC080 User Manual The Summary screen provides a quick view of active EDID configurations stored on the device, including the active Resolution and Audio settings Note: To edit the Resolution and Audio options in the Summary screen, you have to manually select the values in the corresponding Set 1~3 screen. The Summary screen automatically updates when changes are made. The Default and Set 1~3 menu tabs lead to screens showing the configuration for each EDID Set.
VC010 / VC060 / VC080 User Manual Save to Device The Save to Device button enables you to use an EDID configuration for the duration of the session. Unlike the File > Save/Save as menu option, the Save to Device button does not save the configuration into a file. Note: When editing the rest of the screens in the application, make sure you use the File > Save/Save as menu option to make an EDID configuration available for later use. Otherwise, you will have to reenter the EDID configuration values.
VC010 / VC060 / VC080 User Manual Editing EDID Sets Use the succeeding screens to view, configure and store the EDID configuration for each EDID Set. Select which EDID Set you want to view/edit by clicking on the menu tab (Set 1, Set 2 or Set 3). The screen has two panels: Click the option in the left panel that you want to view and/or edit. There are two categories: EDID (Extended Display Identification Data) and CEA (Consumer Electronics Association).
VC010 / VC060 / VC080 User Manual EDID The EDID structure is comprised of 128 bytes in total – each heading shown in the left panel of the EDID Set screen corresponds to a specific number of bytes. Established Timings This screen lists video resolutions/timings that display devices can support. Select the resolutions you want to use for the attached monitor/display device.
VC010 / VC060 / VC080 User Manual Detail Timing / Display Description This screen gives more video resolution options, and provides resolution/ timing details. In the drop down menu, choose a resolution with values that fit the attached monitor/display device. Monitor Description 2 This screen lets you specify the viewing specifications, namely horizontal and vertical scan ranges and pixel clock rate, of your monitor/display device. Enter the values that correspond to your device.
VC010 / VC060 / VC080 User Manual CEA The following screens fall under the CEA category. CEA is an extension data of the EDID structure, which further extends the standard definitions of EDID to support advanced features of monitors/display devices. Note: The screens under the CEA category are relevant for HDMI displays only. Only configure these screens if necessary for your display. You may skip the proceeding screens if you are using a VGA or DVI display.
VC010 / VC060 / VC080 User Manual Video Data This screen lists additional video resolution/timing displays that may be supported by other devices, other than PC monitors (for example 1080i). Select the resolutions that work with the attached monitor/display device. Audio Data This screen lets you select advanced audio configurations for your device. Use the drop down menu to select the audio format (1~3) applicable to your audio output device.
VC010 / VC060 / VC080 User Manual Vendor Specific Data This screen shows other advanced video parameters supported by your display device. You can select whether to enable/disable 3D support from your device if the feature is supported. Detail Timing / Display Description This screen gives more video resolution options, and provides resolution/ timing details (in addition to those specified in the EDID structure).
VC010 / VC060 / VC080 User Manual Saving your Settings To save your EDID configuration, click File from the top menu and either select: Save to overwrite an existing file; or Save as to save the settings into a new .BIN file The .BIN file can be retrieved for later use by clicking File > Load and selecting the configuration file. About To view the EDID Wizard version, click Help and select About. Click OK to close this window.
Chapter 4 The Firmware Upgrade Utility Introduction The purpose of the Windows-based Firmware Upgrade Utility is to provide an easy process for upgrading the VC010 / VC060 / VC080. The program comes as part of a Firmware Upgrade Package that is specific for each device. As new firmware versions become available, new firmware upgrade packages are posted on our website. Check the website regularly to find the latest information and packages.
VC010 / VC060 / VC080 User Manual Preparation To prepare for the firmware upgrade, do the following: 1. Use the Firmware Upgrade Cable provided with this unit to connect a COM port on your computer to the Firmware Upgrade Port of your VC010 / VC060 / VC080. VC010 VC060 VC080 2. Press and hold the Learn/Select button. 3. Plug the power adapter into the VC010 / VC060 / VC080 to power the unit.
Chapter 4. The Firmware Upgrade Utility Starting the Upgrade To upgrade the firmware: 1. Run the downloaded firmware upgrade package file either by doubleclicking the file icon, or by opening a command line and entering the full path to it. The Firmware Upgrade Utility welcome screen appears: Note: The screens shown in this section are for reference only. The wording and layout of the actual screens put up by the Firmware Upgrade Utility may vary slightly from these examples. 2.
VC010 / VC060 / VC080 User Manual (Continued from previous page.) 3. Click Next to continue. The Firmware Upgrade Utility main screen appears. The devices capable of being upgraded are listed in the Device List panel: 4. Click Next to perform the upgrade. If you enabled Check Firmware Version, the Utility compares the device's firmware level with that of the upgrade files.
Chapter 4. The Firmware Upgrade Utility Upgrade Succeeded After the upgrade has completed, a screen appears to inform you that the procedure was successful: Click Finish to close the Firmware Upgrade Utility. Upgrade Failed If the Upgrade Succeeded screen doesn't appear, it means that the upgrade failed to complete successfully. See the next section, Firmware Upgrade Recovery, for how to proceed.
VC010 / VC060 / VC080 User Manual Firmware Upgrade Recovery There are three conditions that call for firmware upgrade recovery: When a firmware upgrade is manually aborted. When the mainboard firmware upgrade fails. When the I/O firmware upgrade fails. To perform a firmware upgrade recovery, do the following: 1. Power off the device. 2. Connect the Firmware Upgrade Cable to its Firmware Upgrade Port. 3. Repeat the upgrade procedure.
Appendix Safety Instructions General This product is for indoor use only. Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers.
VC010 / VC060 / VC080 User Manual Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulting in a risk of fire or electrical shock. Do not attempt to service the device yourself. Refer all servicing to qualified service personnel. If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair. Liquid has been spilled into the device.
VC010 / VC060 / VC080 User Manual Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com For telephone support, see Telephone Support, page iii: North America Email Support Online Technical Support support@aten-usa.com Troubleshooting Documentation Software Updates Telephone Support http://www.aten-usa.
VC010 / VC060 / VC080 User Manual Specifications Function Connectors VC010 VC060 VC080 Video In 1 x HDB-15 F (Blue) 1 x DVI-I F (White) 1 x HDMI Type A F (Black) Video Out 1 x HDB-15 F (Blue) 1 x DVI-I F (White) 1 x HDMI Type A F (Blue) RS-232 Port 1 x Mini Jack (Black) Power Switch Learn/Select LED EDID Set 1 x DC Jack 1 x Pushbutton 4 (Green) Video 1920 x 1200; 1080p Power Consumption DC5V, 0.
VC010 / VC060 / VC080 User Manual Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.
