User manual

VE829 User Manual

IR Remote Control

Note: 1. The battery compartment is located at the back panel of the IR remote

control.

2. Refer to Chapter 4 for further details on how to use the IR remote

control to operate your VE829 installation.

No. Component Description

1 Power On Press this button to power on

the Transmitter and Receiver.

Note: If both Transmitter and

Receiver Power LEDs are red,

press Power ON while pointing

to the Receiver to wake up both

units automatically.

2 Power Off Press this button to turn the

Transmitter and Receiver OFF.

3 Info Press this button to have

Transmitter or Receiver display

the signal quality, source,

channel and resolution, as

follows:

Press it again to exit the Info

display.

4 IR Button Press this button to change the

IR Receiver’s frequency

according to the input source

device’s requirement.

Frequency ranges from 47KHz

to 56KHz to 38KHz.

5 Source Press this button to select the

audio/video source inputs, then

press OK.

6 Transmitter

No.

Press to button to switch to

another transmitter (if more

than one Transmitter is within

range).

7 Up / Down Press this button to select the

audio/video input source (for

the transmitter unit), then press

OK.

8 Left / Right Press to select the audio/video

input source (for the receiver

unit), then press OK.