User manual

9
Chapter 2
Hardware Setup
Wall Mounting
For convenience and flexibility, the VE829R can be mounted on the wall. To
mount a unit do the following:
1. Use the sheet of paper provided with this package, which illustrates the
position of the main holes. Place this paper against the wall and drill two
1/4” holes as per instructions:
2. Insert anchors into the wall, followed
by the screws. Leave 5/8” of the
screw protruding for mounting the
Receiver:
1. Important safety information regarding the placement of this
device is provided on page 25. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
1.9 inches apart (4.8 cm)