User manual

21
Chapter 4
OSD Operation
Overview
The On-Screen Display (OSD) is a menu driven method to handle VE829T /
VE829R control and switching operations. It appears on the attached HDMI
displays (Transmitter or Receiver) after hardware connections are made and
the devices are powered on.
Source Device Switching
You can switch between source inputs via the OSD using the IR remote control
as follows:
 VE829T (Transmitter): Press the Up / Down keys.
 VE829R (Receiver): Press the Left / Right keys.
The OSD cycles through the input devices and you can press OK
once the desired source is selected.
Adding and Selecting Active Transmitter
You can add up to 4 VE829T (Transmitter) unit to a VE829R (Receiver) via
the OSD. If more than one Transmitter is within range and/or are added with
the Receiver, you can use the OSD to select which one to use for the session.
The original transmitter paired with your Receiver is named Transmitter 1,
while the transmitter to be added is named Transmitter 2 in this section.