User manual

OSD Operation
23
Remove Transmitter
To remove a Transmitter from the list of transmitters paired with a receiver, do
the following:
1. Press Transmitter No. on the IR remote control, go to SETUP then press
OK.
2. Select Remove Transmitter.
3. Go to the Transmitter you want to remove and press OK.
Modify Transmitter Name
To change a Transmitter name, do the following:
1. Press Transmitter No. on the IR remote control, go to SETUP then press
OK.
2. Select Modify Transmitter Name.
3. Go to the Transmitter that you want to rename.
4. Using the IR remote control, press the Up and Down keys to change the
letters / numbers; use the Left and Right keys to move the cursor. The IR
key serves as a backspace.
Note: Refer to Naming Source Devices, page 18 for steps on using the Source
button on the top panel of the VE829T to change the Transmitter name.