User manual
VM0808T User Manual
6
Rear View
No. Component Description
1 Power Socket This is a standard 3-pin AC power socket. The power
cord from an AC source plugs in here.
2 Power Switch This is a standard rocker switch that powers the unit
on and off.
3 Grounding Terminal The grounding wire attaches here. See Grounding,
page 9, for further details.
4 Local Stereo Audio
In / Out Ports
These ports are for the local stereo audio source and
speakers.
5 Local Balanced Audio
In / Out Ports
These ports are for the local balanced audio source
and speakers.
6 RS-485 / RS-422
Serial Port
These serial ports, comprising of one 5-pole captive
screw connector (RS-485 / RS-422) and one DB 9
(RS-232), are for serial control of the VM0808T.
7 RS-232 Serial Port
(Female)
8 Local Video In / Out
Ports
These VGA ports are for connecting your local input
source and your local display.
9 RS-232 Serial Port
(Male)
RS-232 serial devices â such as touchscreens and
barcode scanners â plug into this port.
10 Ethernet Port In order to access the VM0808Tâs Browser Graphical
User Interface (GUI), the VM0808T must be
connected to your network. The cable that connects
the VM0808T to your LAN/WAN plugs in here. See
Cable Connection, page 11, for further details
11 Cat 5 In Ports Use Cat 5e/6 cable to connect these ports to up to 8
VE500T transmitters. See Cable Connection, page 11,
for further details.
12 Cat 5 Out Ports Use Cat 5e/6 cable to connect these ports to up to 8
VE500R / VE500RQ receivers. See Cable Connection,
page 11, for further details.
1234 5 6 7
8 9 10 11 12