User manual

Chapter 3. Local Operation
17
Enter Password
If the VM0808T has been configured to require a password for local operation
(see Security Mode, page 28], when the password screen is accessed, the cursor
flashes on the first digit. Enter a 4-digit password to continue to the Main
Screen.
Note: If you are accessing the VM0808T for the first time, the default
password is 1234.
To enter a password, do the following:
1. Use the front panel Left/Right pushbuttons to move the cursor.
2. Use the front panel Up/Down pushbuttons to cycle through the numbers.
3. Press and Release Enter to confirm the password and continue to the Main
Screen.
Note: 1. If you enter an incorrect password, re-enter the correct password
over the incorrect string.
2. If Password Required (see Security Mode, page 28) is enabled,
the timeout is 5 minutes.
MENU
AUDIO
ESC
ENTER
Enter Password: 0 0 0 0
Incorrect Password